- Deep interior of 23.4" or 30.0" depending on the model.
- Ergonomic air foil with aerodynamic Clean-Sweep† airflow openings.
- Upper dilution air supply.
- Upper containment sash foil.
- Zone-perforated, pivoting rear baffle.
- Side-entry air foils.
- Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size.
- Top-accessible HEPA filter for leak scanning of entire surface.
- True bag-in/bag-out filter disposal system (requires certified technician).
- Built-in blower with dynamically- balanced, vibration-isolated motorized impeller and speed control. Blower has a 40% reserve so that the speed may be adjusted as needed by a certified technician as the filter loads.
- Pressure gauge.
- Intrinsically safe, negative pressure design.
- Space-saving design. No separate filtered exhauster is required.
- Upper diffuser screen.
- Quiet operation
- Glacier white and gray, powder-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
- Pre-wired fluorescent lamp and switches for blower and light.
- 1/4" thick tempered safety glass front sash and sides.
- Ergonomic angled and hinged, pivoting sash with wiping seal. Sashes on 5' and 6' models incorporate an external gas-assist lift.
- Models with 9.4" sash opening height have 16.5" locking height and 19.0" maximum loading height. Models with 12.0" sash opening height have 25.75" locking height and 28.25" maximum loading height.
- Two (1.5") utility ports for pass-through of electrical cords.
- 8' cord included.
- Regulation Conformity: SEFA 1, Modified ASHRAE 110, ANSI Z9.5, UL 61010-1, CAN/CSA C22.2 No. 1010.1
Labconco XPert Filtered Balance Systems
Item#: XPERTBALANCESYSTEMSXPert Filtered Balance Systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and exhaust HEPA filter mounted in the upper plenum take up less space than a separate exhauster would require, and isolation supports minimize blower vibration.
Since HEPA filtered air is returned to the laboratory, these vented balance enclosures offer the added benefit of low installation costs and require no ducting to the outside. Interior dimensions accommodate large micro and analytical balances. Containment-enhancing features ensure that potent powders frequently found in pharmaceutical, dry chemical, mold and asbestos weighing operations are kept away from the operator.
- Deep 23" or 30" interior to accommodate large micro and analytical balances
- Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
- Upper dilution air supply
- Upper containment sash foil
- Zone-perforated rear baffle
- Side-entry air foils
- Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
- True bag-in/bag-out filter disposal system
- Built-in blower with dynamically-balanced, vibration-isolated motorized impeller
- Intrinsically-safe, negative pressure design
- Minihelic pressure gauge
- Space-saving design. No separate filtered exhauster is required.
- Upper diffuser screen
- Quiet operation from 48-66 db(A) depending on airflow
- Glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
- Pre-wired fluorescent lamp and switches for blower and light
- Speed control
- 1/4" thick tempered safety glass front sash and sides
- 9.4" or 12.0" high sash opening
- Ergonomic 10 degree angled and hinged sash that pivots upward, locks for loading and has a wiping seal to contain contaminants
- Two utility ports
- Particulate containment independently verified by SafeBridge Consultants, Inc.
Options
- 2', 3', 4', 5' and 6' widths
- International electrical configuration.
- Built-in Guardian 1000 Digital Airflow Monitor or Guardian Airflow Monitor
Required Accessories
- Work surface
- Supporting base
- Carbon Filters for Some Models (see brochure)
Optional Accessories
- Trace Odor Carbon Filters
- Utility Shelves
- Canopy Connections for outside ducting
- Remote Blowers for outside ducting
- Ductwork for outside ducting
Request a Proposal
Related Products
-
Labconco Logic Vue 4′ Class II Enclosure
Item #: 3300400 VIEW PRODUCT -
Labconco Logic Vue 6′ Class II Enclosure
Item #: 3300600 VIEW PRODUCT -
RXPert Single Filtered Balance Systems
Item #: RXPERTSINGLEBALANCESYSTEMS VIEW PRODUCT -
RXPert Double Filtered Balance Systems
Item #: RXPERTDOUBLEBALANCESYSTEM VIEW PRODUCT -
Labconco XPert TXE Equipment Enclosures
Item #: XPERTTXE VIEW PRODUCT -
Labconco XPert Weigh Glove Boxes
Item #: XPERTWEIGHBOX VIEW PRODUCT -
Labconco XPert Bulk Powder Filtered Stations
Item #: XPERTPOWDERSTATION VIEW PRODUCT -
Labconco XPert Bulk Powder Enclosures
Item #: XPERTPOWDERENCLOSURE VIEW PRODUCT
