- Exterior Dimensions (W x D x H) 26.75 x 27.12 x 41.5 in. 679.5 x 689 x 1054 mm
- Foot Print (W x D) 23.75 x 20.75 in. 603.2 x 527.1 mm
- Interior Dimensions (W x D x H) 21.5 x 21 x 26.5 in. 546.1 x 533.4 x 673.1 mm
- Volume 5.65 ft3, 160 L
- Net Weight 235 lbs, 106 kg
NuAire In-VitroCell ES NU-5720 Direct Heat CO2 Incubator w/ Dual Sterilization Cycles & Humidity Control | 5.65 cu. ft. (160L)
Item#: NU-5720 REQUEST PROPOSAL- NuTouch Electronic Control System: The NU-5720 is equipped with the user-friendly NuTouch Electronic Control system, which is a touchscreen system that makes managing the incubator easy.
- Precise CO2 Control: The direct-heat CO2 incubator accurately measures the percentage of carbon dioxide gas using a dual-wave infrared (IR) sensor. The measurement is accurate within ±0.1 percent and is insensitive to other components, such as water vapor.
- Faster Recovery Times: The CO2 level and temperature recover automatically in approximately five minutes after a one-minute door opening. Humidity recovers to 90 percent of original level 20-40 minutes after a 15-second door opening.
- Sterile Environment: Dual sterilization cycles (95°F humidified or 145°F dry) help control contamination when switching cell lines.
- Closed-Loop HEPA Filtration: The CO2 incubator has a closed-loop HEPA filtration system, similar to an ISO Class 5 clean room. A continuously operating air pump maintains positive pressure as gas and air pass through the 99.99 percent efficient filters.
- Clean Design: The interior of the direct-heat incubator is constructed of 16-gauge steel and is crevice-free and cove-cornered. This design, coupled with the fact that the highly polished stainless steel surface inhibits biological growth and is easily cleaned, helps prevent contamination. The inner shelves and rails are easy to remove for sterilization.
- Vibration Free Construction: Because the NU-5720 is constructed with few moving parts, there is almost no vibration to disturb cell lines.
- Precise Temperature Control: The side, bottom, top and back walls of the chamber have foil heating elements and an individual door heater provide a stable temperature accurate within ±0.3°C. Temperature is monitored using dual-temperature sensor probes. Also, two fans mounted on the bottom cover panel run continuously for accurate chamber temperature control over a 60-85°F ambient temperature range.
- Relative Humidity Control: Proper humidity levels up to 95% percent are maintained in the CO2 incubator chamber through water evaporation from a stainless steel three-liter reservoir. A sensor monitors humidity, and water vapor is injected to meet the set point.
Temperature Control:
- Control Range: 5° above ambient (to a 30° max ambient) to 55°
- Set-Point Range: 5°C to 55°C (37.0 Default)
- Uniformity: ±0.35°C @ 37°C
- Accuracy: ± 0.1°C
- Recovery: 0.12°C/min. on Average
- Display Resolution: 0.1°C
- Door and Perimeter Heater Control Logic: Base Duty Cycle set to chamber temperature Set-Point Proportional 0-100% [manually adjustable]
- Temperature Sensor Type: Precision Integrated Circuit
CO2 Control Standard
- Range: 0.1 to 20% 5% Default Set Point
- Accuracy: ±0.1%
- CO2 Recovery: Up to 5% ±0.2% / -0.5 in 5 minutes Average
- CO2 Display Resolution: 0.1%
- CO2 Control Logic: Fixed Algorithm/Manual, Environmental Adaptable
- CO2 Sensor Type: Infrared (NDIR)
You may also like…
-
CO2 Resistant Orbital Shaker
Item #: OSC-26M$4,250.00$3,400.00 VIEW PRODUCT
Request a Proposal
Related Products
-
NuAire In-VitroCell ES NU-5741 Hypoxic Direct Heat CO2 Incubator Dual Sterilization, Humidity/O2 Control | 5.65 Cu. Ft. (160 L)
Item #: NU-5741 VIEW PRODUCT -
NuAire In-VitroCell ES NU-5820 Direct Heat CO2 Incubator with Dual Sterilization Cycles & Humidity Control | 7.06 Cu. Ft. (200 L)
Item #: NU-5820 VIEW PRODUCT -
NuAire In-VitroCell ES NU-5841 Direct Heat Hypoxic CO2 Incubator with Dual Sterilization, Humidity & O2 Control | 7.06 Cu. Ft. (200 L)
Item #: NU-5841 VIEW PRODUCT -
NuAire In-VitroCell ES NU-5731 Hypoxic Direct Heat CO2 Incubator w/ Dual Sterilization Cycles/O2 Control | 5.65 Cu. Ft. (160 L)
Item #: NU-5731 VIEW PRODUCT -
In-VitroCell ES NU-5710 Direct Heat CO2 Incubator with Dual Sterilization Cycles | 5.65 cu. ft. (160L)
Item #: NU-5710 VIEW PRODUCT -
NuAire In-VitroCell ES NU-5831 Direct Heat Hypoxic CO2 Incubator with Dual Sterilization Cycles & Oxygen Control | 7.06 Cu. Ft. (200 L)
Item #: NU-5831 VIEW PRODUCT -
NuAire In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Sterilization Cycles | 7.06 Cu. Ft. (200 L)
Item #: NU-5810 VIEW PRODUCT -
PHCbi MCO-170AICUVDL-PA cellIQ™ Series Dry Heat Sterilization CO2 Incubator
Item #: MCO-170AICUVDL-PA VIEW PRODUCT
